Home Granulators
Showing all 6 results
Full Production Granulator Line
Capacity: 2000 – 2400 lbs / hr
Motor Power: 118 KW
Type: Dry-Copper Recycling System
Includes Wire Chopper / Conveyor System / Granulation Machine
Compact Copper Chopper BDG-2. Granulate scrap wire and cable from .018″ up to 3/4″ diameter cable. Designed for processing, Communication Cable, computer cable, phone cable, car wiring harness, electrical house wire, multi-strand, ethernet cable.
Recycle your scrap cable into copper granules with the BDG-2 Copper Chopper.
Exclusive Features:
–High purity rate of 99.99% for recycling both copper and plastic/rubber.
–PCL System to Control Individual Fans / Motor Speeds
–Can process both Copper and Aluminum wires.
–Compact machine does not take up an excessive amount of space.
–Environmental-friendly: includes a dust collection system
–Low Noise
–Low Maintenance
–Easy 1-Person Operation
– Total Output per HR: 50 to 100lbs including your plastic waste material.
– The BDG-2 is Fraction of the cost of a Large Scale Granulator System
– Compact design includes fork lift channels. Which means it’s easy to move around your shop.
– Heavy Duty Made from Super Thick Metal
– High Purity Recovery Rate 99.9%+
– Requires 1 Operator for normal operation
– Heavy Duty 15 HP Main Chopper Motor. You can process some thick cable with this baby
– 2 Separate Blowers with Vents for Dust Collection
– The Compact BDG-2 features 220v x 3 phase
– The BDG-2 is Fully Covered machine for with no outside access.
– Included are 5 D2 blades, approx. 10 Inch Length on the Rotary Chopper
– 2 pc x 10 inch D2 stationary bed blades
– The Blades are re-sharpenable
– Multiple Bag Dust Collectors
– Variable Frequency Drive to Adjust Shaker Table speed
– Removable screens on Shaker Table for extra refinement
– Amp Meter on Control Panel to view continuous AMPS draw (can tell when machine is getting overloaded)
– Can process both Copper and Aluminum Scrap Wire
– Extra set of blades to allow for sharpening and not lose production
– And more goodies such as toolbox, extra screens, etc
Many Features of Full-Sized Granulator at fraction of Price
· Compact Design – 16 ft x 10 ft footprint
· Fully Enclosed Design
· 110 to 220 lbs/hr ie 50 to 100 kg/hr rated capacity of raw material
a. NOT COPPER OUTPUT BUT RAW MATERIAL INPUT
b. Definitely will vary with material processed and operator experience
· Electrical-220 v 3 ph x 12.3 kw ie approx. 32 amps power draw
· Easy Access to Front Control Panel along with all controls
· Easy Setup and hook up ie approx.
Weight: 3500 lb – 1600 kg
· Granulator Motor-7.5 kw ie 10 Hp
· 5 stage Rotating Blade Granulation System
· Multiple Granulator Screens + multiple Vibration table Screens
· Onboard Dust Collector System
· VFD Controls for Shaker Motor and Blower Motor
a. Easy for the operator to control depending on the materials processed
· External 2 level Vibrating Tables for better separation
· SIDE FEED !!!
· Process .1mm to 30mm wire
· Easy Maintenance and Blade changes
· Supplied Tool Box with wrenches and extra screws etc
· Extra Granulator Blade Sets
Machine: BDG-400A
Dry-Type Copper Recycling Production System
Motor Capacity: 26.5KW – 35 HP
Power Requirement: 220V / 475V / 600V – 3 PHASE
CAPACITY: 150 to 180KG / HR
220 to 400 LBS / HR
Note: Lead time is 12 weeks on these units and manufacturered to your power requirement.
Max Thickness: 3/4″ Diameter
BDG-8L Full Production Granulating System designed for recycling large quantities of scrap cables with purity levels of 99.9%.
Computer cable, wiring harnesses, etherenet cable, massive clumps of wire, any type of wire which does not lend itself well to a traditional wire stripper.
The BDG-8L features an output of 600 to 800 Lb/ hr. Please note this is a total output per hr and includes waste material so your copper recovery will be a percentage of this.
The chopper has D2 Blade material. Which is a tool grade steel and is designed for maximan longevity.
The BDG-8L also include a water cooling system to keep the blade cool while chopping material, and it also includes on board conveyor system for consistent material flow.
The BDG-8L features 9 Electric Motors with a power requirement of 480v x 3 PHASE – 55 HP.
The BDG-8L also features extra conveyors for secondary sorting opertations and it also includes a magnet to remove metal particles.
Features Include:
Dry-Type Copper recycling Production System
480V x 3 PH
Processing Capacity: 600 to 800 LB / HR
Easy to Maintain and Service
Model: BDG-CMG-1
Designed for Single Phase Use
Capable of processing from 0.018″ up to 0.50″ Diameter Cable
Main Chopping Motor: 4 PH
Processing Speed: 50 lbs/hr – Includes Plastic Waste
Power: 220v x Single Phase x 60 HZ – SINGLE PHASE
Includes: Variable Frequency Drive for International Blower Motor
Extra Blades. Extra screens, Extra Sieves, Tool Kit, and Extra Dust Collection Bags